Router Teltonika RUT360 4G LTE

899,00

TELTONIKA RUT360 kompaktowy, przemysłowy ROUTER 4G LTE CAT 6


Nowsza wersja bestsellerowego RUT240 z modemem LTE kategorii 6 (do 300 Mb/s), 2x WAN, FAILOVER

RUT360 to zaktualizowana wersja naszego bestsellerowego RUT240. Ten kompaktowy przemysłowy router oferuje możliwość połączenia z Internetem za pomocą sieci komórkowej kategorii 6 (do 300Mb/s), Wi-Fi i przewodowej.

O PRODUKCIE:

  • 4G LTE CAT 6: Szybkość sieci komórkowej do 300 Mb / s dzięki agregacji operatorów
  • WIFI: 802.11 b/g/n WiFi
  • KOMPAKTOWOŚĆ: niewielki rozmiar – łatwa integracja w dowolnym miejscu
  • TRWAŁOŚĆ: Solidna aluminiowa obudowa
  • BEZPIECZEŃSTWO: Zaawansowany Firewall, VPN Serwer oraz Client, wbudowany OpenVPN, IPsec, PPTP, L2TP & SSTP
  • RMS: Kompatybilny z systemem zdalnego sterowania Teltonika Networks.

PAKIET ZAWIERA:

  • Router RUT360
  • 18 W Euro PSU (Zasilacz)
  • 2 x LTE Antena (swivel, SMA male)
  • 2 x WiFi Antena (swivel, RP-SMA male)
  • Kabel Ethernet (1.5 m)
  • Skrócona Instrukcja Obsługi QSG (Quick Start Guide)
  • RMS Flyer
  • Opakowanie (pudełko)

RUT360 jest wyposażony w dwa interfejsy Ethernet, Wi-Fi 802.11 b/g/n oraz moduł komórkowy 4G LTE Cat 6, oferujący prędkości danych do 300Mb/s.

Unikalne oprogramowanie, zdalne monitorowanie i funkcje bezpieczeństwa sprawiają, że RUT360 jest idealny do aplikacji IoT i M2M, gdzie bezpieczna i niezawodna łączność jest koniecznością. Funkcjonalność agregacji nośnych sprawia, że to kompaktowe urządzenie jest niezastąpione w obszarach lub zastosowaniach, w których prędkości transmisji danych komórkowych są ograniczone.

Specyfikacja Techniczna:

MOBILE

  • Mobile module: 4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps
  • Status: Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, connected band, carrier aggregation, IMSI, ICCID
  • SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto reply
  • USSD: Supports sending and reading Unstructured Supplementary Service Data messages
  • Black/Whiles list (planned): Operator black/white list
  • Multiple PDN: Possibility to use different PDNs for multiple network access and services
  • Band management: Band lock, Used band status display
  • APN: Auto APN
  • Bridge mode: Direct connection (bridge) between mobile ISP and device on LAN

WIRELESS

  • Wireless mode: 802.11 b/g/n, 2×2 MIMO, Access Point (AP), Station (STA)
  • WiFi security: WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
  • ESSID: ESSID stealth mode
  • Wireless Hotspot: Captive portal (Hotspot), internal/external Radius server, SMS OTP, MAC auth, built in customizable landing page, walled garden

ETHERNET

  • WAN: 1 x WAN port (can be configured as LAN) 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover
  • LAN: 1 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover

NETWORK

  • Routing: Static routes, Dynamic routes (planned)
  • Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP (planned), SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP (planned), MQTT (planned), Wake on LAN (WOL) (planned)
  • VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
  • Connection monitoring: Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection
  • Firewall: Port forwards, traffic rules, NAT rules, custom rules
  • DHCP: Static and dynamic IP allocation, DHCP Relay, Relayd
  • QoS / Smart Queue Management (SQM) (planned): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
  • DDNS (planned): Supported >25 service providers, others can be configured manually
  • Network backup: Mobile, Wired and WiFi WAN options, each of which can be used as an automatic Failover
  • Load balancing: Balance Internet traffic over multiple WAN connections
  • SSHFS (optional): Possibility to mount remote file system via SSH protocol (not available in standard FW)

SECURITY

  • Authetication: Pre-shared key, digital certificates, X.509 certificates
  • Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
  • Attack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
  • VLAN: Tag based VLAN separation
  • Mobile quota control: Custom data limits for both SIM cards
  • WEB filter (planned): Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
  • Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

  • OpenVPN: Multiple clients and a server can run simultaneously, 12 encryption methods
  • OpenVPN Encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
  • IPSec: IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
  • GRE: GRE tunnel
  • PPTP, L2TP: Client/Server instances can run simultaneously, L2TPv3 support (planned)
  • Stunnel (planned): Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
  • DMVPN (planned): Method of building scalable IPsec VPNs
  • SSTP (planned): SSTP client instance support
  • ZeroTier: ZeroTier VPN client support
  • WireGuard: WireGuard VPN client and server support

MODBUS

MODBUS TCP SLAVE (PLANNED)

  • ID filtering: Respond to one ID in range [1;255] or any
  • Allow remote access: Allow access through WAN
  • Custom registers: Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality

MODBUS TCP MASTER (PLANNED)

  • Supported functions: Supported data formats
  • 01, 02, 03, 04, 05, 06, 15, 16: 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

MQTT GATEWAY (PLANNED)

  • Gateway: Allows sending commands and receiving data from Modbus Master trough MQTT broker

DATA TO SERVER (PLANNED)

  • Protocols: HTTP(S), MQTT, Azure MQTT, Kinesis

MONITORING & MANAGEMENT

  • WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
  • FOTA: Firmware update from server, automatic notification
  • SSH: SSH (v1, v2)
  • SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET
  • Call: Reboot, Status, Mobile data on/off, Output on/off
  • MQTT (planned): MQTT Broker, MQTT publisher
  • SNMP (planned): SNMP (v1, v2, v3), SNMP trap
  • JSON-RPC: Management API over HTTP/HTTPS
  • Modbus (planned): Modbus TCP status/control
  • RMS: Teltonika Remote Management System (RMS)

IoT PLATFORMS

  • Clouds of things: Allows monitoring of: Device data, Mobile data, Network info, Availability
  • ThingWorx: Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
  • Cumulocity: Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
  • Azure IoT Hub: Can send device IP, Number of bytes send/received, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server

SYSTEM CHARACTERISTICS

  • CPU: QCA9531, MIPS 24kc, 650 MHz
  • RAM: 128 MB, DDR2
  • FLASH storage: 16 MB, SPI Flash (optional up to 256 MB)

FIRMWARE / CONFIGURATION

  • WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup
  • FOTA: Update FW/configuration from server
  • RMS: Update FW/configuration for multiple devices at once
  • Keep settings: Update FW without losing current configuration

INPUT/OUTPUT

  • Configurable I/O: 2 x Configurable digital Inputs/Outputs. Digital input 0 – 6 V detected as logic low, 8 – 30 V detected as logic high. Open collector output, max output 30 V, 300 mA
  • Events: SMS, Email, RMS

POWER

  • Connector: 4 pin industrial DC power socket
  • Input voltage range: 9 – 30 VDC, reverse polarity protection, voltage surge/transient protection
  • Power consumption: 10.5 W max

PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)

  • Ethernet: 2 x RJ45 ports, 10/100 Mbps
  • I/Os: 2 x Configurable digital Inputs/Outputs on 4 pin power connector
  • Status LEDs: 2 x Mobile connection type, 3 x Mobile connection strength, 2 x Eth status, 1 x Power
  • SIM: 1 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external SIM holders
  • Antenna: 2 x SMA for LTE, 2 x RP-SMA for WiFi
  • Power: 1 x 4 pin DC connector
  • Reset: Reboot/User default reset/Factory reset button

PHYSICAL SPECIFICATION

  • Casing material: Aluminium housing with DIN rail mounting option
  • Dimensions (W x H x D): 100 x 30 x 85 mm
  • Weight: 247 g
  • Mounting options: DIN rail, flat surface placement

OPERATING ENVIRONMENT

  • Operating temperature: -40 C to 75 C
  • Operating humidity: 10 % to 90 % non-condensing
Shopping Cart